Integroidut vahvistimet

Vincent SV-237MK uusi malli – hybridivahvistin uskomaton testiraportti, Saksan myydyimpiä vahvistimia.Vincent SV-237 MK uutuus malli 2018 Hybridi vahvistin ”uskomaton testiraportti” Stereoplay lehdessä Joulukuu/2017 ”Highlight” maininta

Hinta laatusuhde yli parhaan mahdollisen (ovh saksassa 2000e) yli 20Kg mittaukset jopa yli mitä tehdas ilmoitti :

2x160W rms 8 ohm ja 2x270W 4 ohm äänipisteet paras mahdollinen kuten myös loppupisteet.

Pääte toistaa A-luokassa 10 W iin asti jonka jälkeen vaihtaa AB luokkaan.

Koska laitteessa etuaste on putkilla valmistettu (ECC 83) saadaan hyvin musikaalinen , luonnollinen ja avoin ääni transistori pääteaste taas antaa voimaa ja tarkkuuttaa bassopäähän tästä ei juurikaan vahvistin parane.

Uudessa mallissä nyt myös kuulokeliitäntä sekä uusi DA muunniin digital in coax ja optinen.

Alumiininen kaukosäädin , alumiini etuosa ym aito iso toroid muuntaja (paras mitä on saatavana) häiriöt lähes nolla. Etuaste erotettu väliseinällä jne.

Vincent SV-237 MK on lähes ”täyhdellinen vahvistin” ja edullinen hinta.

Laitteessa on myös pre out jonka johdosta se on käytettävissä myös pelkkänä etuasteena (putkietuasteena) .

Musta tai hopea väri valittavissa.

Koska Vincent maahantuonti on ihan nytte siirtynyt meille on meillä vielä erikois ennakko tilaus hinta jos teet tilauksen ennen 12/02-2018 (ovh kuluineen suomessa 2195e) Toki 1995e myynti hinta ja jopa alle – tarkan hinnan saat kysymällä – kiitos

info@hifiplus.fi 0400 667 234 TelemaTuonti Hifiplus Yli 30 V laadukasta hifi tuontia ja kauppaa.

Samassa lehdessä Stereoplay joulukuu 2017 myös magnat vastaava hybridivahvistin 3000e hinta mitattiin 2x97w 8 ohm ja 2x169w 4 ohmiin , äänen laatu pisteissä jäi selvästi Vincentin taakse (jopa 2 pistettä jäljessä) kuten myös loppupisteissä ja

Vincent oli vielä 1000e halvempi! Koskien Vincent SV-237MK testaajat mainitsevat vielä että pääteaste sietää hyvinkin hankalia kuormia kuten vanhoja vintagekaiuttimia missä heikko herkkyys ja hankala impedanssin kulku…Vincent ”jyrää ne” vaihekulmat helposti

Jos katsomme vastaavaa jossa pienempi teho 2×100 /2x160w ja maininta usa…6000e hinta uskallan väittää Vincent ei ainakaan ole huonompi ääninen…ja vielä enemmän potkua Vincentissä! http://www.vincent-tac.de/en/product-lines/tubeline.htmlhttp://www.vincent-tac.de/en/product-lines/tubeline.html

How to improve an unbeatable unit? Very easy, just listen to the customers wish.

That’s how the SV-237 becomes the SV-237MK.

The big change is that we replaced the USB input on multiple wish by an coax and optical input. These inputs are more suitable for daily use and offer more possibilities for connections.

The unique circuit of Frank Blöhbum was not changed Technical Specifications Frequency response: 20 Hz – 20 kHz ±0,5 dB 20 Hz – 50 kHz ±2 dB Nominal Output Power at 8 Ω : 2 x 150 W (RMS) Nominal Output Power at 4 Ω : 2 x 250 W (RMS) Nominal Output Power in Class A at 8 Ω : 2 x 10 W (RMS) Input sensitivity: 300 mV Total Harmonic Distortion: 90 dB Input Impedance: 47 k Ω AC power connection type: 230 V/50 Hz Inputs: 4 x Cinch stereo, 1x Coaxial IN, 1x Optical IN Outputs: 1 x REC stereo RCA, 1x PRE stereo RCA, 2 x Power Control (3.5 mm jack socket), 4 x 2 speaker clamps Dimensions (W x H x D): 430 x 152 x 435 mm Weight: 20,4 kg Colour: black / silver Tubes: 1 x 12AX7; 2 x 6N1P-EV Vincent laatukaapelit täältä.

Jos ostat jonkin Vincent tuotteen saat kaapelit todella edullisesti – kysy hinta meiltä – kiitos.

Vincent SV-227 MK uutuus 2018 helmikuu päivitetty uudella coax ja optisella DA muuntimella – kahden viikon vaihtotarjous.Vincent SV-227 MK ””katso edullinen vaihtohinta””.

Putki hybridi uutuus helmikuu 2018 mukana alumiini kaukosäädin ja uusi DAC – coax ja optinen input 20Kg,ALPS laadukas volumepotikka ja päätetrankut.

Voimapesästä irtoaa 2 x 100W 8 ohm ja 2 x 200W 4 ohm .Koska monikaiutin on 4-6 ohmia on tärkeää että juuri 4 ohmiin vahvistin kykenee antamaan voimaa juuri transienttitoiston takia – Sametin pehmeä soundi tässä hybridi mallissa , sopii monille joilla ”liian optimistinen” yläpää tai kovat pinnat / isot ikkunat kuuntelutilassa ,3 kpl 12AX7 etuaste putkia + fetti pääte ……hinta 1880 e hyvitämme tomivasta vahvistimestasi reilusti 2 viikon ajan , tarjous loppuu 16/2-2018 eli maksat väliä 1289euro kun lähetät vanhan meille – kiitos. sis. rahti uudelle laitteelle

info@hifiplus.fi TelemaTuonti Yli 31V laatu hifi tuontia 0400 667 234

Laitteessa mm:Kuulokeliitäntä joka käyttää putkia tietenkin myös laite käyttää samaa etuastetta mutta saat samalla upeasoundisen kuuloke vahvistimen….basso ja diskantti säädöt kuten ennenvanhaan – tone napin takana , hyvät kaiutin valinta vaihtoehdot A-B-A+B ja pois kokonaan.Takaa tulee kuva myöhemmin – ne mitä löydät netista ei ole sama sillä tämä tulee nyt vasta myyntiin RCA pre out laadukas putki etuaste myös REC out , 2 kpl 3,5mm power lähtö jos vaikka kytket Vincet päätteen lisäksi joskus eli kaukokäynnistys lev 43x kork 15x syv 43,5 The latest findings in valve technology and in the area of circuitry design have been put to use here.

Once more a full amplifier of outstanding quality has been created which knows no equal in terms of value for money either. Hybrid technology from Vincent means the sound of a valve coupled with the power of a transistor.

Technical Specifications Frequency response: 5 Hz – 50 kHz +/- 1 dB Nominal Output Power RMS/8 Ohm: 2x 100W, Nominal Output Power RMS/4 Ohm: 2x 200W Input sensitivity: 180mV, Signal-Noise ratio: > 90 dB, THD: < 0.1 % (1 kHz, 1 Watt) Input impedance: 47 kOhm, Inputs: 6 x RCA, 1 x USB (B) Outputs: 4 x 2 Speaker Terminal (A & B), 1 x RCA Rec Out, 1 x RCA Pre Out, Outputs: 1 x phone jack 6,3 mm DA input coax – optical Mains supply: 230 V/50 Hz,

Colour: black/silver Weight: 20 kg, Dimensions (WxHxD): 430 x 150 x 435 mm Tubes: 3 x 12AX7, Power Control: 2 x 12V Trigger Out (3,5mm)

Vincent PHO 8 RIAA yksi parhaita erikois erä tulossa – erikois hinnan saat kysymällä – kiitos Vincent suosittelee Phonar kaiuttimia puhdasta ääntä järki hinnoin

 SMSL Q5 PRO Stereo Amplifier USB Optical Coaxial DAC with Subwoofer Output 2x40W

Enjoy all the best your music has to offer with the SMSL Q5 PRO DAC amplifier.

This all-in-one piece of technology starts with a handsome, brushed aluminum case and fills it with a DAC and powerful stereo amplifier; and the wireless remote controls it all.

Connect the Q5 PRO to your computer via the USB or to your TV with the digital coaxial/optical input and stream music and media at an impressive 192 kHz/24-bit sample rate.

Keep in mind that digital decoding is only for 2-channel PCM sources, the Q5 Pro will not decode 5-channel surround sound digital sources. A 3.5 mm input jack is located on the rear panel for analog signal input. This high-powered amplifier delivers 40 watts per channel at 4 ohms. Use the Q5 PRO on your desktop, bookshelf, or anywhere high-quality sound is desired. Control the Q5 PRO from anywhere in the room with the included wireless remote. Functions like power on/off, volume, input selection, and even EQ settings are all controlled by this easy-to-use remote. So sit back and relax knowing you can dial in that perfect sound. The Q5 PRO is newly equipped with a line level subwoofer output. A built-in low pass filter is set at 200 Hz with a slope of 24 dB.

This means you only send your the low frequencies your powered subwoofer can handle. Adjustment of the volume control automatically controls the volume of the powered subwoofer for convenient operation. Includes: SMSL Q5 PRO amplifier DAC, wireless remote control with battery, power adapter, and 4 ft. Micro USB cable.

Note: It is normal for the amplifier to produce a small spark if you plug the power supply into the amplifier with live voltage. To avoid this small spark insert the power plug into the jack found on the rear of the amplifier, then insert the AC plug into your wall outlet. Specifications: • Power output: 2 x 40 watts @ 4 ohms, 2 x 20 watts @ 8 ohms •

Frequency response: 20-20,000 Hz • THD+N: <0.04% Dynamic range: 100 dB • SNR: 90 dB • Power consumption: 102 watts • Inputs: USB, digital optical, digital coaxial, stereo 3.5 mm • Subwoofer output (RCA) with 200 Hz, 24 dB/octave low pass filter •

Sampling bit rate: 192 kHz/24-bit (coaxial and optical), 96 kHz/24-bit (USB) • Power requirement: 110-240 VAC, 50/60 Hz • Dimensions (not including knobs and binding posts): 5.39" L x 1.3" H x 4.06"D.  info@hifiplus.fi  0400 667 234 

 EX-232 DAC ja bluetooth valmiina 2 kpl optinen sisään+2 kpl coax sisään + RCA liittimet ym.  This amplifier EX-232 was designed in an audiophile approach to ensure the high fidelity amater a faithful reproduction of his favourite music.

It delivers 2x75W RMS into 8Ω 2x130w 4 ohm.

It includes a WIRELESS interface, allowing you to play music from your Smartphones.

The EX-232 comes with 4 unbalanced audio inputs including a 3,5 mini jack MP3 input, one digital input (coaxial and/or optical) allowing connection to latest generation TV sets.

Finally, it provides a « pre-out » to perform bi-amplification. HIGHLIGHTS - MP3 input - High quality manufacturing - Shielded preamplifier - Large power output amplifier stage for both channels - Stage power generously dimensioned consequences:

ability to drive any kind of speakers (8, 4, 2 Ohms). - WIRELESS with removable antenna - Optical and Coaxial digital inputs - MP3 input 3,5mm - Headphone output 6.35mm Included Accessories 1x Detachable IEC power cord 1x Wireless antenna 1x Remote control RC-EX4 2x Batteries 1x Manual DAC: The S/PDIF input is interfaced to a Cirrus Logic CS8416 chip and analog digital conversion is supported by a PCM1973 circuit from the same manufacturer.

Maximum sampling is 24 bits at 96 kHz on the coaxial and optical inputs.

Digital Inputs: The OPTICAL connector will override the source connected to COAXIAL, unless the source connected to the optical connector is turned off. In this case, you can listen to the source connected in coaxia  

SPECIFICATIONS Power: 2x75W RMS into 8 Ω and 2x130W into 4 Ω Total harmonic distorition < 0,01% Signal to noise ratio > 100 dBA Bandwidth: 20 Hz - 20 KHz Speaker Impedance Compatibility Range: 2-8 Ω Wireless Range: about 10 m Connectors 2x RCA line inputs 1x Optical input 1x Coaxial input 1x Phono input 1x Output line 1x Output REC 1x MP3 input (Mini-jack 3. 5 mm) 1x RCA line output: Pre-Out 1x Headphone Jack 6.35 mm in front 1x Wireless antenna 4x Screw terminals compatible with banana plugs Dimensions (WxHxD): 430x111x420 mm Weight: 10.5 kg Finishes:  varastossa 

 Line Magnetic noin 4 mallia varastossa meillä Vikkä tämä näin edullinen on se valmistettu käsin point to point johdotuksella - tehty kestämään jotain 100-200 vuotta :-) ...pienellä huollolla varastossa 4 eri mallia  päivitys 14/3-2018 raj.erä speciaali hintaan.   https://www.line-magnetic.eu/en/home-line-magnetic-en  olemme virallinen maahan tuoja Line Magnetic tuotteille 

Press - Magazine Haute-fidélité N°218 - August/September 2016: "Le petit qui voit gra

nd", récompense "Meilleur Achat" - View article - Magazine Classica - October/November 2016: récompense "Choc" - View article - Magazine Diapason N°655 - March 2017: "une aubaine pour mois de 1 500€" - View article - Magazine Diapason - November 2017:

Award granted - Diapason d'Or. - View article The Line Magnetic integrated amplifier LM-211IA is a push pull amplifier with 4x EL34 tubes in Class AB amplification and delivers 2x15W in triode mode and 2x32W in ultra-linear mode. It has 4 balanced line inputs and 4/8Ω output groups.

The rear-illuminated front panel meter is used to adjust polarization of the tubes.

The use of high quality components (Realcap capacitors, ALPS potentiometer) wired in the air for the most part is the guarantee of exemplary reliability.

Its transformers output are of EI type, specially designed for power supply.

The LM-211IA delivers dynamic, rich and natural sound.

Highlights - Single-ended - Classe A amplifier - Point-to-point wiring - High quality components TUBES Input stage: 2x 12AX7 et 2x 12AU7 Power stage: 4x EL34 Hand-made construction with the finest point-to-point wiring Bias control is accessible on top of the amplifier panel with true ampere meter. Analog Inputs: 4 line inputs Load impedance: 4/8Ω SoftStart and time-delay circuit. (30 seconds)

Specially designed EI transformer for power supply Two EI output transformers with wide bandwidth are applied ALPS volume control and Realcap capacitors are applied.

Metal and removable tube guard cage Infrared Remote control

Specifications Class AB amplifier 2x15W RMS Triode 2x32W RMS Ultra-linear

Tubes: 2x 12AX7, 2x 12AU7, 4x EL34 THD: 1% (1kHz) Signal/Noise ratio: 88dB (Weighted A) Frequency response: 10 à 50.000 Hz (-1.5 dB) Sensitivity: 200 mV (Built-in Mode) Input Impedance: 100kΩ Load impedance for HP to connect: 4/8Ω 

Included Accessories 2x Fuses 1x Remote control 1x Detachable power cord 1x Manual Tubes Basics Common Replacements 12AX7 12AX7EH, ECC83, E83CC, CV4004, ECC803, 5751 12AU7 ECC82, 12AU7EH, 5814, 6189, CV4003 EL34 6CA7 Generality Dimensions (L x H x P) : 376 x 192 x 345 mm Weight: 19.6 Kg Finish: Silver

 https://www.line-magnetic.eu/en/home-line-magnetic-en  

 NYT 699e raj erä kotona siis varastossa   saatavana myös mono päätteenä - kysy kiitos   VR-70E II Stereo-Röhrenvollverstärker Der Dynavox-Röhrenvollverstärker VR-70E II ist in seiner Preisklasse unangefochtene Spitzenklasse.

Wie diverse Tests in Audiozeitschriften zeigen, lässt er sich sogar durchaus mit sehr viel teureren Röhrenverstärkern vergleichen. Er besitzt einen Eingang und Lautsprecheranschlüsse für 4 und 8 Ohm und leistet 2 x 40 W RMS

in einem Fequenzbereich von 10 Hz - 40 kHz.

Folgende Röhren kommen zum Einsatz: 4 x EL34 (Ultralinearschaltung) für die

Endstufe, 2 x 6F2(ECF82) für Vorstufe und Phasenumkehr. Kann auch als

Endstufe zusammen mit dem Röhrenvorverstärker TPR-1 (BN 204244 bzw. BN 204242) betrieben werden. Wird mit abnehmbarem Schutzgitter ausgeliefert. Technische Daten: Bestückung: Endstufe: 4 x EL34 Vorstufe: 2 x 6F2 Ausgangs leistung: 2 x 40W RMS Eingangsimpedanz: 20 kOhm Frequenzbereich: 10 Hz - 40 kHz

Klirrfaktor (THD): < 1% S/N Ratio: > 88 dB Betriebsspannung: 230 V AC/ 50 Hz Maße (BxTxH): 350 x 300 x 185 mm Farbe: Schwarz Gewicht ca.: 14,5 kg

 Hinta sopiva :-)   The Line Magnetic integrated amplifier LM-216IA is a push-pull amplifier with 4x KT88 tubes in Class AB amplification and delivers 2x22W in triode mode and 2x38W in ultra-linear mode. It has 4 balanced line inputs and 4/8Ω output groups.

The rear-illuminated front panel meter is used to adjust the polarization of the tubes.

The use of high quality components (Realcap capacitors, ALPS potentiometer) wired in the air for the most part is the guarantee of exemplary reliability.

Its transformers output are of EI type, specially disigned for power supply.

The LM-216iA delivers dynamic, rich and natural sound. Highlights - Triode/ultra-linear modes - Point-to-point wiring - High quality components TUBES Input stage: 2x 12AX7 et 2x 12BH7 Power stage: 4x KT88 Hand-made construction with the finest point-to-point wiring Bias control is accessible on top of the amplifier panel with true ampere meter.

Analog Inputs: 4 line inputs Load impedance: 4/8Ω SoftStart and time-delay circuit. (30 seconds) Specially designed EI transformer for power supply Two EI output transformers with wide bandwidth are applied ALPS volume control and Realcap capacitors are applied Metal and removable tube guard cage Infrared Remote control Specifications Class AB amplifier 2x22W RMS Triode and 2x38W RMS Ultra-linear Tubes: 2x 12AX7, 2x 12BH7, 4x KT88 THD: 1% (1kHz) Signal/Noise ratio: 87dB (Weighted A) Frequency response: 10 à 50.000 Hz (-1.5 dB) Sensitivity: 220 mV (Built-in Mode) Input Impedance: 100kΩ Load impedance for HP to connect: 4/8Ω Included Accessories 2x Fuses 1x Remote control 1x Detachable power cord 1x Manual Tubes Basics Common Replacements 12AX7 12AX7EH, ECC83, E83CC, CV4004, ECC803, 5751 12BH7 12BH7EH KT88 KT88EH, 6550EH, 6550, 6550A Généralités Dimensions (L x H x P) : 376 x 192 x 345 mm Weight: 19.6 Kg Finish: Silver

 Hinta sopiva Forty watts per channel, Class AB Integrated Stereo Amplifier with EL34 output power tubes, 12AX7 and 12AU7 input tubes. Standard with EL34 output tubes.

Want to enjoy some other types of power tubes?

That is why we have tube selector here. Different from other inputs Pre-In offers you a possibility to connect to some other Preamplifier so that you can the LM-34IA as a power amplifier. Specially designed EI transformers for power supply and two EI output transformers with wide bandwidth are applied. Hand made construction with the finest point-to-point wiring and special audiphiles components has carefull been selected by our designers.

User bias control has been used for bias adjustment and one meter has been added to the top plate to allow you to monitor bias with ease. Highlights - Class AB amplifier -

Point-to-point wiring - High quality components TUBES Input stage: 1x 12AX7 - 2x 12AU7 Power stage: 4x EL34 Bias control is accessible on top of the amplifier panel with true ampere meter. SoftStart and time-delay circuit. (30 seconds) Specially designed EI transformer for power supply Two EI output transformers with wide bandwidth are applied

ALPS volume control and Realcap capacitors are applied. Metal and removable tube guard cage Infrared Remote control Specifications Class AB amplifier - 2x40W RMS THD: 1% (1kHz) Signal/Noise ratio: 88dB (Weighted A) Frequency response (-1.5dB): 10 - 50.000 Hz Sensitivity: 200 mV (Mode intégré) Input Impedance: 100kΩ Load impedance for HP to connect: 4/8Ω Connectors 3x Line inputs RCA (pair) 1x Pré-in input 2x Screw terminals compatible with banana plugs Included Accessories 2x Fuses 1x Remote control 1x Detachable power cord 1x Manual Tubes Basics Common Replacements 12AX7 12AX7EH, ECC83, E83CC, CV4004, ECC803, 5751 12AU7 ECC82, 12AU7EH, 5814, 6189, CV4003 EL34 6CA7 Generality Dimensions (L x H x P): 377 x 190 x 345 mm Weight: 20 Kg Finish: Black

 This amplifier EX-212 was designed in an audiophile approach to ensure the high fidelity amater a faithful reproduction of his favourite music. It delivers 2x45WRMSinto8Ω,thankstoitshigh-performance2x70Winto4Ω.

It includes a WIRELESS interface, allowing you to play music from your Smartphones.

The EX-212 comes with 4 unbalanced audio inputs including a 3,5 mini jack MP3 input,

one digital input (coaxial and/or optical) allowing connectiontolatestgenerationTVsets. Finally,itprovidesa«pre-out»toperformbi-amplification. MAIN FEATURES -High qualitymanufacturin -Shieldedpreamplifier -Large power output amplifier stage for bothchannels -Stage power generouslydimensionedconsequences:

abilityto drive anykindof speakers (8, 4, 2 Ohms). -WIRELESS withremovableantenna

-Optical and Coaxial digital inputs -MP3 input 3,5mm -Headphoneoutput 6.35mm IncludedAccessories 1x DetachableIEC power cord 1x Wireless antenna

1x Remotecontrol RC-EX4 2x Batteries 1x Manual DAC: The S/PDIF input is interfaced to a Cirrus Logic CS8416 chip and analog digital conversion is supported by a

PCM1973 circuit from the same manufacturer. Maximum sampling is 24 bits at 96 kHz on the coaxial and opticalinputs Digital Inputs: The OPTICAL connector will override the source connected to COAXIAL, unless the source connected to the optical connector is turned off. Inthiscase,youcanlistentothesourceconnectedincoaxial

 This amplifier EM-201 was designed in an audiophile approach to ensure the highfidelityamaterafaithfulreproductionofhisfavouritemusic. Itdelivers2x25WRMSinto8Ωand2x35Winto4Ω. It includes a Wireless interface,

allowing you to play music from your Smartphones of tablets.

The EM-201 comes with 4 unbalanced audio inputs Including aUSB that allows youto play yourdigital filesstored on USB key in MP3 and WMA formats and including one digital input (coaxial and/or optical)allowingconnectiontolagestgenerationTVsets. The EM-201 offers a Subwoofer output to connect an active subwoofer.

This outputiscoupledwitha"Large/Small"selectorallowingactivateahigh-pass filtertooptimizeyourlisteningin2.1. MAIN FEATURES -High qualitymanufacturing

-Analogue power supplyand amplification (fromEX222) -Large power output amplifier stage for bothchannels(150VA) -WIRELESS connectionwithremovableantenna

-Optical and Coaxial digital inputs -USB input -Jack 6.35 mm

Headphoneoutput Readablefiles via USB: -MP3 Format: MPEG-1 Audio Layer 3 Samplingfrequency: 44.1 ou 48 kHz Bit rate: 320 kb/s or less

-WMA Samplingfrequency: 44.1 kHz Bit rate: 192 kb/s or less IncludedAccessories 1x DetachableIEC power cord 1x Wireless antenna 1x Manual Digital Inputs: The OPTICAL connector will overide the source connected to COAXIAL,

unless the source connected to the optical connector is turned off. Inthiscase,youcanlistentothesourceconnectedincoaxial.